Product ID:SCOTCHWELD 2214 ADHESIVE REGULAR
MSDS Date:01/01/1987
FSC:8040
NIIN:01-077-5417
MSDS Number: BGKRH

3M CENTER

Emergency Phone: 612-733-1110 OP55

Cage: 07884

MECHANICAL SPRING CORP

BROOKLYN, NY 11217-2702 US

Telephone: 718-852-0116

Cage: 07884

DICYANDIAMIDE, AL POWDER, SYN RUBBER, AMORPHOUS SILICA

ACGIH TLV: N/D

EPOXY RESIN BLEND, DILUENT, POLYGLYCOL DIEPOXIDE RESIN

ACGIH TLV: N/D

150-68-5)(2-4%)

CAS: 150-68-5

RTECS: YS6300000

ACGIH TLV: N/D

Effects of Overexposure:EYE,SKN: IRRT,POSS SENSITIZATION.INH:NONE
EXPECTED @ ROOM TEMP. SENS/IRRT FROM CURING VAPORS OR DUST

First Aid:EYE:FLUSH 10 MIN W/COPIOUS WATER.CALL PHYL.SKN:WASH
SOAP/WATER.REMVE CONTAM CLOTHING. INH:REMVE TO FRSH AIR, CALL PHYS
IF BREATHING DIFFICULT. INGEST: NO TOXIC EFFECTS EXPECTED.

Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USE SCBA IN FIRES INVOLVING THIS MATERIAL
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:OBSERVE ALL LISTED PRECAUTIONS. COLLECT
SPILLAGE, CLEANUP RESIDUE, STORE/SHIP IN APPROVED CONTAINERS ONLY.
USE ABSORBENTS AS NEEDED.

Handling and Storage Precautions:VENT CURING OVENS TO OUTDOORS. AVOID
SKN/EYE CONTACT.
Other Precautions:3-(P-CHLOROPHENYL)-1-1 DIMETHYL UREA IS SUSPECT
CARCINOGEN. NO EXPOSURE EXPECTED IN NORMAL USE

Respiratory Protection:USE DUST MASK DURING GRINDING/CUTTING CURED
RESIN.AVOID INHL CUR VAP
Ventilation:MECH VENT W/ADEQUATE AIR FLOW
Protective Gloves:IMPERVIOUS GLOV
Eye Protection:USE SAFETY GLASSES.
Other Protective Equipment:PREVENT SKN/EYE CONTACT.
Supplemental Safety and Health
P/N FORMERLY SCOTCHWELD EC-2214 ADH REGULAR. EM ID#:62-2214-XXXX-X;
UPDATE PER 3M MSDS (OSHA) 14OCT85,DOC#1026665.SEE PNI A FOR OLD
(1981) INGR LISTING.

HCC:N1
Spec Gravity:1.44
Solubility in Water:VERY SLIGHT
Appearance and Odor:GRAY VISCOUS PASTE
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:NO
STRONG OXIDANTS
Stability Condition to Avoid:PROLONGED STORAGE AT ELEVATED TEMP.
Hazardous Decomposition Products:CO,CO*2,N,HCN POSSIBLE WHEN EXP TO
EXCESSIVE HEAT/FLAME
Conditions to Avoid Polymerization:ELEVATED STORAGE TEMP

Waste Disposal Methods:COMMERCIAL INCINERATION AT 99.99% EFF OR
RECLAMATION IS PREFERRED. LANDFILL OR OTHER DISPOSAL IAW
LOCAL,STATE,FEDERAL REGS ONLY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.